EPDM Roof Repair Kit

Name: EPDM Roof Repair Kit
Brand: ClassicBond
SKU: cb-repair-kit
Price: 16.08 GBP
Availability: InStock

Questions & Answers (3)

Skip to the end of the images gallery

Skip to the beginning of the images gallery

In stock

£16.08 £13.40

Qty

Delivery From £15 for all Standard Flat Roofing Materials.

Compatible Systems:

The ClassicBond One Piece EPDM system is great for large or small flat roof areas and is normally bonded on to a timber deck in one piece so no joins!
Find out more!
The ClassicBond Pro Fleece Reinforced EPDM system is a high-performance, reduced shrinkage system which is ideal for large overlay roofs due to rapid installation times.
Find out more!

Used For: Used to repair punctures and damage to EPDM rubber roof Membranes

Kit Includes:

0.5m of 6 inch Cover Tape
1x 250ml EPDM Primer
1x Brush to apply primer

Installation Notes:

Clean area around the damage with either EPDM cleaner or soapy water
Loose lay the patch over the area to be repaired and using a marker create an outline on the membrane
Apply Primer to this marked out area and allow to dry (5-10 mins depending on ambient temperature)
Remove plastic and apply patch to primed area (Shiny side down)
Use seam roller to apply pressure to entire patch and ensure good adhesion

An Overview

SKU	cb-repair-kit
Stock Type	Warehouse Fulfilled
Brand Name	ClassicBond

Downloads

Documentation

Questions & Answers (3)

My roof has a small hole which is causing a leak, how easy is it to repair this?

One of the most evident benefits of EPDM rubber roofing is that it can be repaired very quickly and easily, allowing you to catch a problem before it turns into something much bigger! Supplied as a 6 inch strip, any small hole or rip can be sealed effectively with our repair patch kits. This easy-to-use patch, primer and brush combination will ensure you can safely patch any minor damage to the roof.
Link to the kit here!

Can EPDM Withstand Hard Impacts From Outside Conditions? Such As Branches Falling On It Or A Bird Pecking On It?

Along with a life expectancy of 50 years and beyond, EPDM rubber can stand up to quite some force from outside elements, in our video below we explore what different objects falling on the rubber will do to it and how much damage it takes to actually penetrate the membrane! Prepare to be surprised!

Why Have Bubbles Appeared On The Edge Of My Newly Laid EPDM Rubber Roof?

Occasionally, bubbles and blisters can appear around the perimeter of the EPDM rubber roof just after it's been fitted. There are a few reasons why this can happen, the Contact Adhesive could have been applied too thick, or if it has not been allowed enough time to properly tack-off. Luckily, we can share a few tips to help avoid this potential problem, check our video for an in-depth explanation.

You might want these instead

ClassicBond® 1.2mm EPDM Rubber Roof Membrane
£12.24 £10.20
9 Inch Elastoform Uncured EPDM Tape
£24.42 £20.35
3 Inch EPDM Seam Tape
£5.94 £4.95

EPDM Roof Repair Kit

6 Inch Cover Tape Technical Data Sheet

ClassicBond & ClassicBond Pro Brochure

Primer Material Safety Data Sheet

Primer Technical Data Sheet

My roof has a small hole which is causing a leak, how easy is it to repair this?

Can EPDM Withstand Hard Impacts From Outside Conditions? Such As Branches Falling On It Or A Bird Pecking On It?

Why Have Bubbles Appeared On The Edge Of My Newly Laid EPDM Rubber Roof?