ClassicLiquid Primer 4kg
Built Up Felt
OSB Decking and all other Timber surfaces
As a reactivation overcoat primer over ClassicLiquid products if these products require recoating outside of the 48 hours window.
It is essential that the intended substrate is thoroughly cleaned with a high pressure washer, on smaller areas a stiff broom and soapy water and rinse will suffice. Remove all oil, grease and wax contaminants, cement laitance and loose particles.
Make good all cracks and blisters, fill surface irregularities with a suitable product. Allow to fully dry. Apply ClassicLiquid Primer at a sufficient coverage rate to seal the surface. Primer coverage rates will vary depending on surface porosity. Allow the primer coat to fully dry. (approx. 2 hours but is dependent on ambient air temperature and humidity)
- Very Competitively Priced
- Fast Curing
- Single coat (of membrane) application possible
- Bubble free smooth finish
- Easy to apply - due to lack of reinforcing fabric
- Excellent weather & UV resistance
- Will remain elastic down to – 40°c
- Will not soften in high temperatures
- High tensile and tear strength, excellent abrasion resistance
- Showerproof in 30 minutes
- Seamless finish
- Trafficable in 24 hours
Order your 4kg ClassicLiquid Primer by selecting the quantity required and simply add the product to your basket, or alternatively give us a call on 02476 667234 and one of our expert team will be able to assist with your specific requirements.
SKU CL-Primer-4 Weight (kg) 4.0000 Brand Name ClassicLiquid Roofing System ClassicLiquid Delivery Lead Time 1 Working Day