Flat Rubber Roof Kits

Flat Roof Kits for extensions where the front edge has a gutter and the back edge is adjoining a house wall.

Please select correct size kit from the drop down menu.

£247.81 Excl. VAT £297.37 Incl. VAT

£247.81 £297.37

Each

Qty

*Kit Size (DxW)

*Trim Color

White
Black
Anthracite Grey

* Required Fields

Compatible with ClassicBond

The ClassicBond One Piece EPDM system is great for large or small flat roof areas and is normally bonded on to a timber deck in one piece so no joins! Find out more

Availability: In stock

Save for later

Overview

Details

EPDM Rubber Roof Kit

This Flat Rubber Roof Kit is easy to install, looks great and has a life expectancy of up to 50 years! EPDM rubber membranes are UV, Ozone and Infrared stable so will not crack, blister or peel. We have put together a kit including the 1.2mm One-Piece EPDM rubber membrane, adhesives and edging trims.

Colour: Lead / Slate Grey

Used For: EPDM rubber roof for garage, extension, or porch where the roof is joined to a wall

Included in Kit:

-1.2mm thick ClassicBond EPDM Membrane (Size as per roof kit chosen)
-Water Based Adhesive to adhere membrane to roof deck
-Contact adhesive to adhere perimeter of roof deck to Membrane
-Sure EdgeGutter for front edge
-Sure Edge Kerb for both side edges
-Sure Edge Corner for both front corners
-Wall trim to act as flashing against your house wall
-External corner atches & primer for both back corners where roof meets house wall
-Tools requires for DIY Installation(Rollers, Scissors & Paint Brush)
-All Pins and Clips to go with Trims
-Installation Guide

WE CAN TAILOR THE KIT TO SUIT YOUR ROOF - CALL 0800 313 4486 TO DISCUSS

The Membrane size is the same as mentioned in kit size. Therefore your roof size will need to be smaller to allow for edge overlaps. e.g. 6metre x 3metre roof kit will fit a roof that is no larger than 5.7metres x 2.7metres.

Additional Information

SKU	FRK
Weight (kg)	50.0000
Brand Name	ClassicBond
Roofing System	Classic Bond
Length (metres)	No
Width	No
Depth (Width)	No
Delivery Lead Time	1 Working Day

Installation

ClassicBond Installation Manual Quick Reference (1.20 MB)

This Manual includes a step by step guide to preparing your flat roof and installing the new rubber roof and trims.

FAQ

1

Does it have to be dry for EPDM roofing to be laid?

Yes, EPDM Membranes require the substrate to be dry prior to installation. This is so the the adhesive & primers can effectively bond the rubber to roof deck. EPDM products will not adhere to wet or damp surfaces. Trapped moisture may vaporize and negatively affect the performance of the membranes.
Read More
2

Is there a right side up when installing ClassicBond EPDM Membranes?

Classicbond EPDM membranes are identical on both sides so there is no right or wrong side when installing. However you may sometimes find a small amount of writing printed on one side of the Rubber Membrane and it may be wise to keep this side down so an eyesore is not created.
Read More
3

What is the difference between CLASSICBOND® and Firestone EPDM?

CLASSICBOND® EPDM is CE marked with a nominal thickness of 1.2mm as opposed to the thinner 1.1mm of Firestone RubberCover as defined by EN 13956
Read More