Russ Tape - Mechanical bonding
RUSS Tape for Mechanical Fixing
In common with most single ply material, EPDM will over time try to shrink. The base tie in mechanically fixes the membrane to the roof deck where the membrane turns UP through an angle change. e.g. Wall upstand. Any further movement is accommodated by the EPDM’s ability to elongate by over 300%
RUSS (Reinforced Universal Secure Strip) has bonding tape pre-applied along one edge, this is bonded to the underside of the EPDM using ClassicBond Rubber Primer, meaning that the EPDM membrane does not require puncturing during installation.
2" Seam Fastening Plates are included with the Russ tape. We supply sufficient seam fasteners to secure the tape to the deck at 300mm intervals i.e. 3-4 per metre
- Ideal for Additional membrane securement as needed.
- Ideal for perimeter securement and around penetrations
N.B. Seam Fasteners must be used in conjunction with the appropriate screw fixings for the substrate.
| SKU | CB-Tape-Russ-Kit |
|---|---|
| Stock Type | Warehouse Fulfilled |
| Width | 150mm (6") |
| Brand Name | ClassicBond |
| Material | EPDM |
| Color | Black |
| System Compatability |
|
If you're buying for a new roof or replacing an old one, you will need to consider the following components.
- Adhesives
- Tapes
- Drains
- Edge Trims
- Tools
-
9 Inch Elastoform Uncured EPDM Tape£24.42 £20.35 -
6 Inch Cover Tape£14.52 £12.10 -
3 Inch EPDM Seam Tape£5.94 £4.95 -
External Corner Patch Uncured Tape£7.70 £6.42 -
Internal Corner Patch Uncured Tape£3.94 £3.28
