6 Inch Cover Tape

Name: 6 Inch Cover Tape
Brand: ClassicBond
SKU: CB-Tape06
Price: 14.52 GBP
Availability: InStock

Questions & Answers (6)

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sold per linear metre not per roll

Please enter quantity required in linear metres, i.e. for a 4 metre length, please enter 4 in the quantity field.

In stock

£14.52 £12.10

Qty

Delivery From £15 for all Standard Flat Roofing Materials.

Compatible Systems:

The ClassicBond One Piece EPDM system is great for large or small flat roof areas and is normally bonded on to a timber deck in one piece so no joins!
Find out more!
The ClassicBond Pro Fleece Reinforced EPDM system is a high-performance, reduced shrinkage system which is ideal for large overlay roofs due to rapid installation times.
Find out more!

Used For: Used as a cover strip where joining two pieces of membrane where there is no overlap and a 3" splice tape can not be used.

Installation Notes:The EPDM surfaces to receive the tape must be dry, clean and free from dust and dirt. Wherever flashing strips are to be adhered to any other EPDM rubber the surface must be primed with ClassicBond Rubber Primer and allowed to dry (Touch dry)

Bonding to other surfaces: The tapes and splice tape can be used to join the EPDM rubber membrane on to both TPO and PVC roofing systems. The tapes are often used to repair damaged TPO and PVC as a cost effective alternative to replacing the whole flat roof. When joining the rubber membrane to uneven or granular built up roof surfaces, such felt or Asphalt, we recommend the use of a Termination bar and water cut off mastic (water block)

An Overview

SKU	CB-Tape06
Stock Type	Warehouse Fulfilled
Width	150mm (6")
Brand Name	ClassicBond
Material	Part Cured Synthetic Rubber
Color	Black

Downloads

Documentation

Videos

How to install a Classicbond EPDM flat Roof

How to Join Two ClassicBond EPDM Membranes Together from Rubber4Roofs

Questions & Answers (6)

What is the Life Expectancy of EPDM Rubber Roofs?

EPDM Rubber roofs have a 50 year life expectancy.

EPDM has been in commercial use since the 1960s. And many of those roofs are still around today.

Can EPDM Withstand Hard Impacts From Outside Conditions? Such As Branches Falling On It Or A Bird Pecking On It?

Along with a life expectancy of 50 years and beyond, EPDM rubber can stand up to quite some force from outside elements, in our video below we explore what different objects falling on the rubber will do to it and how much damage it takes to actually penetrate the membrane! Prepare to be surprised!

How Long Does It Take To Install A ClassicBond Pro Roof?

This will depend on the current substrate, size and type of roof; along with if there is any detail work required such as skylights.

Our friends over at RoofScout have made a great video showing you exactly how long it takes to install ClassicBond Pro on a freestanding, timber-boarded summer house.

For Sam, it took him just under 2 hours and 15 minutes. He did install this roof alone and installed edge trims which make a difference to the installation time.

Check out RoofScout's video below.