Sure Edge Gutter Drip Trim

Name: Sure Edge Gutter Drip Trim
Brand: Sure Edge
SKU: SE-Drip

Questions & Answers (5)

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Pins & Joining Clips Included

Trim Colour

In stock

£21.59 £17.99

Qty

Delivery From £15 for all Standard Flat Roofing Materials.

Compatible Systems:

The ClassicBond One Piece EPDM system is great for large or small flat roof areas and is normally bonded on to a timber deck in one piece so no joins!
Find out more!
The RESITRIX Reinforced Self-Adhesive system is perfect for complicated flat roofs, gutter linings, parapet walls and awkward shapes. Also the right choice for overlaying most existing roofing coverings.
Find out more!
The ClassicBond Pro Fleece Reinforced EPDM system is a high-performance, reduced shrinkage system which is ideal for large overlay roofs due to rapid installation times.
Find out more!

Sure Edge Gutter Drip Trim 2.5m

The Sure Edge Gutter Drip Trim is used to secure the membrane where water runs off the roof.

The Sure Edge Gutter Drip Trim comes in two parts, the back plate and the front plate. Both parts clamp the membrane into place and also creates a step into the gutter.

The gutter drip trim is not only strong but is highly durable and resilient due to the co-extruded u-PVC that it is made from. This gutter drip trim can also be used with all EPDM roof systems and is available in Gloss White, Gloss Black & Gloss Anthracite in 2.5 metre lengths.

Ideal for Professional Roofers & DIY Roofers alike, the product is very easy to install, just cut to length. Sure Edge Gutter Drip Trim provides a fast, clean, simple finish to the flat roofing system.

We also offer the complete range of colour matched corners!

Order your Sure Edge Gutter Drip Trim by selecting the required colour and quantity and simply add the product to your basket, or alternatively give us a call on 02476 667234 and one of our expert team will be able to assist with your specific requirements.

Colour: Available in Gloss White, Gloss Black & Gloss Anthracite

Height: 75 mm

Length: 2.5 metres

Qty in Pack: 1

(Stainless Pins and Jointing Clips all included)

Storage Information
Please ensure all trims are stored flat and out of direct sunlight until fitted to the roof.

Note: You may need to install a Timber batten prior to installing the backplate of the Drip trim to ensure water flows directly into the centre of the Gutter

An Overview

SKU	SE-Drip
Stock Type	Warehouse Fulfilled
Brand Name	Sure Edge
Length (meters)	2.5
Material	uPVC

Videos

How to install a Classicbond EPDM flat Roof

Downloads

Documentation

Questions & Answers (5)

How should I store my rubber roof kit?

What Products Will I Receive In My Rubber Roof Kit?

We sell a wide variety of EPDM rubber flat roofing kits to our customers and try to provide the widest possible selection, with options for many different types of flat roofs available from Orangery Roofs to Garden Rooms. Check our video below for a full breakdown of what to expect in your kit! (The information about the contents of your kit can be found on the product page on our website.)

How Long Does It Take To Install A ClassicBond Pro Roof?

This will depend on the current substrate, size and type of roof; along with if there is any detail work required such as skylights.

Our friends over at RoofScout have made a great video showing you exactly how long it takes to install ClassicBond Pro on a freestanding, timber-boarded summer house.

For Sam, it took him just under 2 hours and 15 minutes. He did install this roof alone and installed edge trims which make a difference to the installation time.

Check out RoofScout's video below.

How Long Does It Take To Install A ClassicBond Roof?

Generally, installing a ClassicBond roof can be a very quick job if you have basic knowledge about the preparation and the correct steps to take.

Some factors will affect the installation time such as the current substrate, size and type of roof; along with if there is any detail work required such as skylights.

Our friends over at RoofScout have made a great video showing you exactly how long it takes to install ClassicBond on a freestanding, timber-boarded log cabin.

For Sam, it took him just under a 1hour and 30minutes. He did install this roof alone and installed edge trims which make a difference to the installation time.

Check out RoofScout's video below.

Are There Pre-Drilled Holes On The Trims?

Yes!

Both our Sure Edge Gutter Drip trims and Sure Edge Kerb trims come with pre-drilled holes to make installation even easier.

These pre-drilled holes act as a guide to ensure that enough pins are used for a secure installation. Each trim has 8 holes which are all equally spaced out.

You might want these instead

Sure Edge Kerb Trim 2.5M
From: £21.59 £17.99
Metal Edge Trim (Black Plastisol)
From: £16.80 £14.00
Metal Wall Flashing Trim
From: £12.30 £10.25