SPB Spray Gun & Tip
SPB Spray Gun & Tip is a bundle where the Spray Gun comes with the Tip in the box. To be used in conjunction with our SPB Spray Hose 4M.
Used for: Applying ClassicBond Sprayable Contact Bonding Adhesive to adhere ClassicBond rubber membrane to most materials. Used on up-stands and vertical surfaces
Advantages of traditional Contact Bonding Adhesive:
- Up to 6 times faster application time
- Up to 4 times faster drying time
- Increased operating window
- Zero Waste
- Up to 3 square metres per canister
Application Up-stands: Spray the contact bonding adhesive onto the upstand and the back of the membrane from a distance of 100mm-150mm. It is also good practice to secure the membrane to the deck perimeter with a 150mm width strip of contact adhesive. Ensure that the contact adhesive is touch dry before rolling the membrane onto the substrate/up-stand.
Application Non-Permeable Deck: Spray the adhesive onto both the deck and underside of the membrane evenly from an approximate distance of 100-150mm. Ensure that the contact adhesive is touch dry before rolling the membrane onto the deck.
Note: It is not possible to re-position the membrane once stuck down using contact adhesive.
Installation Tip: Allow sufficient time for the contact adhesive to become touch-dry depending on weather conditions. If the membrane is bonded whilst the contact adhesive is still wet, you may notice air bubbles appearing under the membrane. These will disappear within a short period of time due to the rubber roofing membrane being partially breathable.
SKU |
CB-Spray-gun&tip-bundle |
---|---|
Stock Type |
Warehouse Fulfilled |