Garage Rubber Roof Kits
Garage Rubber Roof Kit
Our Garage Rubber Roof Kits are Designed to be used for free standing structures where the gutter is found along the longest edge. They are Easy to install, look great and have a life expectancy of up to 50 years! EPDM rubber membranes are UV, Ozone and Infrared stable so will not crack, blister or peel. We have put together a kit including the 1.2mm One-Piece EPDM rubber membrane, adhesives and edging trims.
Colour: Lead / Slate Grey
Used For: EPDM Rubber Roof for garages and free standing structures.
Included in Kit:
- 1.2mm thick ClassicBond EPDM Membrane (Size as per roof kit chosen)
- Water based deck adhesive for bonding to the timber roof
- Contact Adhesive for bonding deck perimeter
- Sure Edge Kerb Edge for 3 sides
- Sure Edge Gutter Drip Edge for 1 long side
- 4 x Sure Edge External Kerb Edge corners
- 1 x Tool Kit (Scissors/Roller set/Mini roller)
- (All clips and pins are included for the trims)
WE CAN TAILOR THE KIT TO SUIT YOUR ROOF - CALL 0800 313 4486 TO DISCUSS
The Membrane size will be the same as the kit size. Therefore your roof size will need to be smaller to allow for edge overlaps. e.g. 6metre x 3metre roof kit will fit a roof that is no larger than 5.7metres x 2.7metres.
You might also need
If you’re buying for a new roof or replacing an old one, you will need to consider the following components in your roof kit...
- Adhesives
- Tapes
- Drains
- Edge Trims
- Tools
SKU |
GGK |
---|---|
Stock Type |
Warehouse Fulfilled |
Brand Name |
ClassicBond |
What Products Will I Receive In My Rubber Roof Kit?
We sell a wide variety of EPDM rubber flat roofing kits to our customers and try to provide the widest possible selection, with options for many different types of flat roofs available from Orangery Roofs to Garden Rooms. Check our video below for a full breakdown of what to expect in your kit! (The information about the contents of your kit can be found on the product page on our website.)
How Difficult is it to Install a Rubber Roof on a Garden Building?
For the most part, each section of the installation is easy. Gluing the membrane down with both adhesives is very straightforward and securing the trims and clips to the perimeter is as well. Watch our video for a detailed step by step breakdown so you can follow along!
Which Timber Boards Should I Use For My New Rubber Roof?
Choosing the right boards for your job can be daunting with many different options available to use for flat roof decking. However, some are much more highly recommended than others. In our video below, Sam covers the key differences between the most commonly used boards, OSB3 and S-Grade Plywood.
How Long Does It Take To Install A ClassicBond Roof?
Generally, installing a ClassicBond roof can be a very quick job if you have basic knowledge about the preparation and the correct steps to take.
Some factors will affect the installation time such as the current substrate, size and type of roof; along with if there is any detail work required such as skylights.
Our friends over at RoofScout have made a great video showing you exactly how long it takes to install ClassicBond on a freestanding, timber-boarded log cabin.
For Sam, it took him just under a 1hour and 30minutes. He did install this roof alone and installed edge trims which make a difference to the installation time.
Check out RoofScout's video below.
How Thick are ClassicBond Roofing Membranes?
ClassicBond Roof membranes are available in two thicknesses. The Standard membrane is 1.2mm thick and the Premium membranes is 1.5mm
Can a ClassicBond EPDM Rubber Membrane be laid over an existing roof covering
EPDM membranes can be installed onto a veriety of surfaces. For best results we recommend that the membrane be laid onto new Timber sheets (OSB3). This fresh new deck can however be laid stright over your existing roof covering without the need to strip the old roof .
Is Classicbond EPDM BBA Certified?
Yes. ClassicBond EPDM holds the British Board of Agrément certificate, No. 11/4853, issued to Flex-R Ltd. The BBA carries out assessment, testing, approval and certification of products and systems for the construction industry against national requirements, internationally recognised standards or other relevant technical specifications, reviewed and reissued every 3 years.
Fire Ratings
The ClassicBond system is also fire rated, the 1.2mm EPDM has a fire rating of EXT.F.AB and the 1.5mm EPDM membrane is fire rated to EXT.F.AA. Fire rating is carried out on a variety of deck surfaces and it is important to seek the certificate that relates most accurately to your roof structure.
What Temperatures Can A Rubber Roof Be Installed In?
We recommend a minimum temperature of 5 degrees C for EPDM installation. This is due the the WBA adhesive being water based and lower temperatures may cause the adhesive to freeze over and fail.
-
Flat Rubber Roof Kits£359.77 £299.81
-
EPDM Porch Roof Kits£186.02 £155.02
-
ClassicBond® 1.2mm EPDM Rubber Roof Membrane£12.24 £10.20