Orangery Roof Kits

Name: Orangery Roof Kits
Brand: ClassicBond
SKU: ORK
Price: 488.04 GBP
Availability: InStock

Questions & Answers (12)

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Kit Size (DxW)

Trim Colour

Black

Anthracite Grey

White

In stock

£488.04 £406.70

Qty

Delivery From £15 for all Standard Flat Roofing Materials.

Compatible Systems:

The ClassicBond One Piece EPDM system is great for large or small flat roof areas and is normally bonded on to a timber deck in one piece so no joins!
Find out more!

EPDM Orangery Roof Kit

This ClassicBond Orangery Roof Kit is designed for orangeries with parapet walls down both sides and a gutter along the front edge. You will Find our Kits to be easy to install, Great looking and have a life expectancy of up to 50 years! EPDM rubber membranes are UV, Ozone and Infrared stable so will not crack, blister or peel. We have put together a kit including the 1.2mm EPDM rubber membrane, adhesives and edging trims.

The kit is .

Included in Kit:

EPDM Membrane as per kit chosen
Water based deck adhesive for bonding to the timber roof
Contact Adhesive for bonding deck perimeter & upstands
Sure Edge Gutter Drip Edge for front edge
Wall Trim to act as flashing alonf house wall
8 External Patches with Primer for corners of roof and lantern
Tool Kit (Scissors/DIY Seam Roller/Paint brush/Roller set/Mini Roller)
Mastic for wall flashing
Water Cut Off Mastic to seal between rubber and lantern
(All clips and pins are included for the trims)

WE CAN TAILOR THE KIT TO SUIT YOUR ROOF - CALL 0800 313 4486 TO DISCUSS

The Membrane size will be the same as the kit size. Therefore your roof size will need to be smaller to allow for edge overlaps. e.g. 6metre x 3metre roof kit will fit a roof that is no larger than 5.7metres x 2.7metres.

An Overview

SKU	ORK
Stock Type	Warehouse Fulfilled
Brand Name	ClassicBond

Downloads

Documentation

Videos

How to install a Classicbond EPDM flat Roof

Questions & Answers (12)

What is the Life Expectancy of EPDM Rubber Roofs?

EPDM Rubber roofs have a 50 year life expectancy.

EPDM has been in commercial use since the 1960s. And many of those roofs are still around today.

Will my EPDM membrane have a join?

All membranes do have manufactures joins as supplied to us. Depending on the spacing of the joins and the size of the piece being cut off the roll, sometimes there is no manufacturers join in the membrane.

All EPDM membranes, whether it is Firestone, ClassicBond or SKYGUARD have these joins and they are unavoidable. However, the big advantage is that it is supplied to you in one piece as our website states, which means you don't have to do any onsite joins where workmanship could be a factor.

Does It Have To Be Dry For EPDM Roofing To Be Laid?

EPDM membranes require the substrate to be dry prior to installation so that the adhesive & primers can effectively bond the rubber to the roof deck. EPDM products will not adhere to wet or damp surfaces. It is important to bear in mind that trapped moisture within the deck may vaporise and negatively affect the performance of the membrane.

If you would like more tips on when to install your EPDM roofing, check out the video below.