EPDM Flat Roofing Systems for the Trade & DIY
This is a high strength, solvent based bonding adhesive specifically designed and manufactured to withstand the temperature extremes of flat roofing installations. Perfect for bonding ClassicBond the roof deck and vertical surfaces.
Suitable for a range of surfaces e.g. timber, brickwork, metal, PVC & concrete.
Application Up-stands: Use a 4" mini roller to apply contact adhesive to both the up-stand and rubber roofing membrane. It is also good practice to secure the membrane to the deck perimeter with a 150mm width strip of contact adhesive. This will stop the membrane from lifting due to shrinkage. Ensure that the contact adhesive is touch dry before rolling the membrane onto the substrate/up-stand.
Application Non-Permeable Deck: Using a roller apply contact adhesive to both the deck and underside of membrane evenly. Ensure that the contact adhesive is touch dry before rolling the membrane onto the deck approx 5-20 minutes. Note It is not possible to re-position the membrane once stuck down using contact adhesive.
Size: 1.0 Litres (Coverage 1 to 2 sqm)
Size: 2.5 Litres (Coverage 4 to 5 sqm)
Size: 5.0 Litres (Coverage 7 to 10 sqm)
Size: 10 Litres (Coverage 15 to 20 sqm)
Coverage: 0.5 Ltr / m2 when applied to both sides (depending on surfaces)
| SKU | CB-CON |
|---|---|
| Brand Name | ClassicBond |
| Roofing System | Classic Bond, Shed Cover |
| Color | Opaque |
| Coverage | See Additional Info |
| Delivery Lead Time | No |
Yes, EPDM Membranes require the substrate to be dry prior to installation. This is so the the adhesive & primers can effectively bond the rubber to roof deck. EPDM products will not adhere to wet or damp surfaces. Trapped moisture may vaporize and negatively affect the performance of the membranes.
Read MoreThis article will help with choosing the correct adhesive for bonding EPDM to your roof deck
Read MoreCLASSICBOND® EPDM is CE marked with a nominal thickness of 1.2mm as opposed to the thinner 1.1mm of Firestone RubberCover as defined by EN 13956
Read MoreWhilst bubbles or blisters on a once-piece EPDM roof can be unsightly they will not cause the rubber membrane to fail. These bubbles of trapped air/moisture can be caused by a variety of issues which are all avoidable if the roof design is correct and the membrane correctly installed.
Read More
100mm Mini Roller With Two Sleeves
