We will be closed for the Easter holidays from the 29th of March to the 1st of April. We will reopen at 8am on the 2nd of April.

Flat Rubber Roof Kits

Flat Roof Kits for extensions where the long edge has a gutter and the other long edge a wall flashing adjoining the house wall.

In stock
£363.23 £302.69

Delivery From £15 for all Standard Flat Roofing Materials.
Compatible Systems:
  • The ClassicBond One Piece EPDM system is great for large or small flat roof areas and is normally bonded on to a timber deck in one piece so no joins!
    Find out more!

EPDM Rubber Roof Kit

This Flat Rubber Roof Kit is easy to install, looks great and has a life expectancy of up to 50 years! EPDM rubber membranes are UV, Ozone and Infrared stable so will not crack, blister or peel. We have put together a kit including the 1.2mm EPDM rubber membrane, adhesives and edging trims.

Colour: Lead / Slate Grey

Used For: EPDM rubber roof for garage, extension, or porch where the roof is joined to a wall 

Included in Kit:

  • 1.2mm thick ClassicBond EPDM Membrane (Size as per roof kit chosen) 
  • Water Based Adhesive  to adhere membrane to roof deck
  • Contact adhesive to adhere perimeter of roof deck to Membrane
  • Sure Edge Gutter for front edge
  • Sure Edge Kerb for both side edges
  • Sure Edge Corner for both front corners
  • Wall trim to act as flashing against your house wall
  • External corner patches & primer for both back corners where roof meets house wall
  • Tools requires for DIY Installation (Rollers, Scissors & Paint Brush)
  • All Pins and Clips to go with Trims


WE CAN TAILOR THE KIT TO SUIT YOUR ROOF - CALL 0800 313 4486 TO DISCUSS

The Membrane size is the same as mentioned in kit size. Therefore your roof size will need to be smaller to allow for edge overlaps. e.g. 6metre x 3metre roof kit will fit a roof that is no larger than 5.7metres x 2.7metres.

Buying a roof kit?
You might also need

If you’re buying for a new roof or replacing an old one, you will need to consider the following components in your roof kit...

  • Adhesives
  • Tapes
  • Drains
  • Edge Trims
  • Tools
Why not let the Kitbuildr do the hard work for you?
An Overview

SKU

FRK

Stock Type

Warehouse Fulfilled

Brand Name

ClassicBond

Videos
Downloads
Questions & Answers (11)

What is The Life Expectancy of EPDM Rubber Roofs?

EPDM Rubber roofs have a 50 year life expectancy.

EPDM has been in commercial use since the 1960s. And many of those roofs are still around today. 

Will My EPDM Membrane Have A Join?

All membranes do have manufactures joins as supplied to us. Depending on the spacing of the joins and the size of the piece being cut off the roll sometimes there is no manufacturers join in the membrane.

All EPDM membranes whether it is Firestone, ClassicBond or SKYGUARD have these joins and they are unavoidable, however, the big advantage is that it is supplied to you in one piece as our website states which means you don't have to do any onsite joins where workmanship could be a factor.

Does It Have To Be Dry For EPDM Roofing To Be Laid?

EPDM membranes require the substrate to be dry prior to installation so that the adhesive & primers can effectively bond the rubber to the roof deck. EPDM products will not adhere to wet or damp surfaces. It is important to bear in mind that trapped moisture within the deck may vaporize and negatively affect the performance of the membrane. 


If you would like more tips on when to install your EPDM roofing check out the video below.

What Products Will I Receive In My Rubber Roof Kit?

We sell a wide variety of EPDM rubber flat roofing kits to our customers and try to provide the widest possible selection, with options for many different types of flat roofs available from Orangery Roofs to Garden Rooms. Check our video below for a full breakdown of what to expect in your kit! (The information about the contents of your kit can be found on the product page on our website.)

How Difficult is it to Install a Rubber Roof on a Garden Building?

For the most part each section of the installation is easy, Gluing the membrane down with both adhesives is very straightforward and securing the trims and clips to the perimeter is as well. Watch our video for a detailed step by step breakdown so you can follow along!

Which Timber Boards Should I Use For My New Rubber Roof?

Choosing the right boards for your job can be daunting with many different options available to use for flat roof decking, however some are much more highly recommended than others, in our video below, Sam covers the key differences between the most commonly used boards, OSB3 and S-Grade Plywood.

How Long Does It Take To Install A ClassicBond Roof?

Generally, installing a ClassicBond roof can be a very quick job if you have basic knowledge about the preparation and the correct steps to take.

Some factors will affect the installation time such as the current substrate, size and type of roof; along with if there is any detail work required such as skylights.

Our friends over at RoofScout have made a great video showing you exactly how long it takes to install ClassicBond on a freestanding, timber-boarded log cabin.

For Sam, it took him just under a 1hour and 30minutes. He did install this roof alone and installed edge trims which make a difference to the installation time.

Check out RoofScout's video below.

How Thick are ClassicBond Roofing Membranes?

ClassicBond Roof membranes are available in two thicknesses. The Standard membrane is 1.2mm thick and the Premium membranes is 1.5mm 

Can a ClassicBond EPDM Rubber Membrane be laid over an existing roof covering

EPDM membranes can be installed onto a veriety of surfaces. For best results we recommend that the membrane be laid onto new Timber sheets (OSB3). This fresh new deck can however be laid stright over your existing roof covering without the need to strip the old roof . 

Is Classicbond EPDM BBA Certified?

Yes. ClassicBond EPDM holds the British Board of Agrément certificate, No. 11/4853, issued to Flex-R Ltd. The BBA carries out assessment, testing, approval and certification of products and systems for the construction industry against national requirements, internationally recognized standards or other relevant technical specifications, reviewed and reissued every 3 years.

Fire Ratings

The ClassicBond system is also fire rated, the 1.2mm EPDM has a fire rating of EXT.F.AB and the 1.5mm EPDM membrane is fire rated to EXT.F.AA. Fire rating is carried out on a variety of deck surfaces and it is important to seek the certificate that relates most accurately to your roof structure.

What Temperatures Can A Rubber Roof Be Installed In?

We recommentd a minimum tempereture of 5 degrees C for EPDM installation. This is due the the WBA adhesive being water based and lower temperetures may cause the adhesive to freeze over and fail. 

You might want these instead
Back to top