Top Drain 100mm

Used For: EPDM drain outlets are used to join an internal drain to the EPDM membrane where the drain runs through the roof deck.

Diameter: 100 mm Diameter

Material: Plastic

Installation Notes:
1) Install base of Top drain to roof deck recessing if necessary
2) Install rubber membrane as per instructions using contact adhesive around perimeter of outlet
3) Cut rubber membrane hole using aluminium guide place included
4) Apply water cut off mastic to edge of membrane
5) Screw Leaf grate down on top base to secure membrane and form seal

This Article is suitable for the following EPDM products

You might also need these products for your job...

Water Cut off Mastic£6.50Water Cut off Mastic

Top Drain 100mm

This Article is suitable for the following EPDM products

You might also need these products for your job...

Buy Now