Self Adhesive Drain Outlet

Used For: Self Adhesive EPDM drain outlets are used to join an internal drain to the EPDM membrane where the drain runs through the roof deck or gutter.

3 Size Options - Confirm size required at end of order process

Width: 50-75mm mm Diameter Spigot
Width: 75-90mm mm Diameter Spigot
Width: 90-105mm mm Diameter Spigot

Material: EPDM Rubber Membrane with Polypropylene spout

Installation Notes:
1) Fit the membrane first
2) Cut a hole in the membrane equal to the size of the outlet spigot to be used
3) install the drain outlet in position
4) Heat weld flange to the main membrane working from the inside diameter to the edge.

This Article is suitable for the following EPDM products

You might also need these products for your job...

Professional Seam Roller£24.60Professional Seam Roller
Steinel HG2000E Heat Gun 240V£105.00Steinel HG2000E Heat Gun 240V

Self Adhesive Drain Outlet

3 Size Options - Confirm size required at end of order process

This Article is suitable for the following EPDM products

You might also need these products for your job...

Buy Now