9 Inch Elastoform Uncured Tape

Used For: Designed to form internal / external corners / awkward features / pipes / penetrations / drain outlets and any other feature where the ability to stretch and form the material is required. 225mm Uncured flashing can also be used to create an inexpensive pipe boot.

Width: 225 mm (9")

Material: Uncured EPDM Rubber

Order Amount: Per Linear Metre.

Installation Notes:The EPDM surfaces to receive the flashing must be dry, clean and free from dust and dirt. Wherever Un-cured flashing tapes are to be used the surface must be primed with Rubber Primer and allowed to dry (Touch dry), Smooth Side Down!

This Article is suitable for the following EPDM products

You might also need these products for your job...

Professional Seam Roller£24.60Professional Seam Roller
Rubber Primer£5.00Rubber Primer
Brass Penny Roller£19.50Brass Penny Roller

9 Inch Elastoform Uncured Tape

This Article is suitable for the following EPDM products

You might also need these products for your job...

Buy Now