6inch Cover Tape

Used For: Designed to form patches or cover strips where joining two pieces of membrane where there is no overlap and a 3" splice tape can not be used.

Width: 150 mm (6")

Material: Part Cured EPDM Rubber

Order Amount: Per Linear Metre.

Installation Notes:The EPDM surfaces to receive the Tape must be dry, clean and free from dust and dirt. Wherever flashing strips are to be adhered to any other EPDM rubber the surface must be primed with Rubber Primer and allowed to dry (Touch dry)

Bonding to other surfaces: The Tapes and splice tape can be used to join the EPDM rubber membrane on to both TPO and PVC roofing systems. The tapes are often used to repair damaged TPO and PVC as a cost effective alternative to replacing the whole flat roof. When joining the rubber membrane to uneven or granular built up roof surfaces such felt or Asphalt we recommend the use of a Termination bar and water cut off mastic (water block)

This Article is suitable for the following EPDM products

You might also need these products for your job...

Rubber Primer£5.00Rubber Primer
Professional Seam Roller£24.60Professional Seam Roller
DIY Seam Roller£4.99DIY Seam Roller
Brass Penny Roller£19.50Brass Penny Roller

6inch Cover Tape

This Article is suitable for the following EPDM products

You might also need these products for your job...

Buy Now