Basket: 0 Items £0.00   |   Trade Login   |   Call: 02476666254

Water Based Deck Adhesive

ClassicBond Water Based Deck Adhesive

ClassicBond Water Based Adhesive

Used For: Adheres One Piece rubber roofing membrane and Shed Cover membrane to timber decking

Size: 2.5 Litres (Coverage 7 to 10 sqm)
Size: 5.0 Litres (Coverage 15 to 20 sqm)
Size: 7.5 Litres (Coverage 25 to 30 sqm)
Size: 10 Litres (Coverage 35 to 40 sqm
Size: 15 Litres (Coverage 50 to 60 sqm)

Coverage: 0.35 Ltr / m2 (depending on application)

Colour: White/Cream

Application: Use a roller to apply evenly over the substrate. Membrane should be installed immediately and positioned whilst the adhesive is still wet.

Installation Tip: After allowing the rubber roofing membrane to relax in position on the roof, roll half of the membrane back to the centre of the roof to expose the deck. The adhesive can then be applied in small stages (strips) and the rubber roofing membrane rolled back in place whilst the adhesive is still wet. This will help avoid the adhesive drying out prematurely on hot days

How to Apply Water Based Adhesive

CLassicBond Water Based Adhesive is applied directly to the roof deck. The rubber membrane is then rolled or placed in to position immediately. This adhesive is used for bonding the main timber deck roof area.

This Article is suitable for the following EPDM products

You might also need these products for your job...

Payments by SagePay Rubber4Roofs accepts: Visa, Visa debit, Mastercard, Solo, maestro, Visa electron Rubber4Roofs accepts: PayPalNational Federation of Roofing Contractors Ltd