Water Based Deck Adhesive

Used For: Adheres One Piece rubber roofing membrane and Shed Cover membrane to timber decking

Size: 2.5 Litres (Coverage 7 to 10 sqm)
Size: 5.0 Litres (Coverage 15 to 20 sqm)
Size: 7.5 Litres (Coverage 25 to 30 sqm)
Size: 10 Litres (Coverage 35 to 40 sqm
Size: 15 Litres (Coverage 50 to 60 sqm)

Coverage: 0.35 Ltr / m2 (depending on application)

Colour: White/Cream

Application: Use a roller to apply evenly over the substrate. Membrane should be installed immediately and positioned whilst the adhesive is still wet.

Installation Tip: After allowing the rubber roofing membrane to relax in position on the roof, roll half of the membrane back to the centre of the roof to expose the deck. The adhesive can then be applied in small stages (strips) and the rubber roofing membrane rolled back in place as you work towards the edge of the roof. This will help avoid the adhesive drying out prematurely on hot days

This Article is suitable for the following EPDM products

You might also need these products for your job...

Down To Earth Roller Set£4.00Down To Earth Roller Set

Water Based Deck Adhesive

This Article is suitable for the following EPDM products

You might also need these products for your job...

Buy Now